AEG DVD 4528 TFT Instruction Manual And Guarantee page 53

Password Setup
05-DVD4528TFT_GB.indd 53 05-DVD4528TFT_GB.indd 53
Default
Select the command „Default/Reset" if you want to reset the player to
the factory implemented default settings.
Any settings you have made will be lost.
If you want to operate the DVD-Player with a child lock system, you
must fi rst enter a password. This password safeguards the settings for
the child lock system, so that it can only be changed by yourself.
Password Mode
On:
A password has to be entered whenever an attempt is made to
modify the child lock function.
Off:
The child lock system can be changed without a password being
required.
Password
In this menu you can change the password for the child lock system.
In order to change the password, you must fi rst enter the current pass-
word. The master password is „136900".
NOTE:
If you forgot your password, you can deactivate the child lock system
with this password.
Proceed as follows to change the password:
1. Enter the present password in the „Old Password" line with the
Numerical buttons (Fig. 2/26) of the remote control.
To prevent the password from being read by unauthorized persons
only the characters "„XXXXXX" will appear on the screen.
2. Enter the new password in the „New Password" line with the Nume-
rical buttons of the remote control.
3. Confi rm the new password by entering it again in the „Confi rm" line.
Confi rm your entry with the ENTER button (Fig. 2/22).
English
53
30.11.2007 9:50:08 Uhr 30.11.2007 9:50:08 Uhr