AEG DVD 4528 TFT Instruction Manual And Guarantee page 48

English
48
Understanding
the menu structure
Using the menu
Overview of the main menu
05-DVD4528TFT_GB.indd 48 05-DVD4528TFT_GB.indd 48
NOTE:
Many of these default settings can be changed via both the remote
control and the menu. The difference is: If you change the default
settings via the remote control, these changes will only be valid until
the DVD-Player is switched off or the DVD is changed.
However, any changes made in the menu are permanent.
The Setup menu has two menu levels:
Main menu:
The main level is represented by graphical symbols.
Sub-menu:
The corresponding sub-menu options can be found under each of
the main menu options.
Navigation and selection
Use the Cursor Buttons (Fig. 2/21) ( / ) on the remote control to
browse through the main menu.
In contrast to this, you must use the Cursor Buttons ( / ) to move
in the sub-menu.
Select a menu option with the ENTER-button (Fig. 2/22).
Use the ENTER-button also to select an option (e.g. "PAL" in the
illustration on the left). The selected option (in the example „PAL") is
now highlighted.
Slide control
In many menus you will fi nd slide controls to adjust e.g. the volume or
the brightness of the screen. The slide control is used as follows:
1. Select with the ENTER-button.
2. Move the control with the Cursor Buttons ( / ).
3. Confi rm the entry with the ENTER-button.
General Setup (1)
Audio Setup Page / Dolby Digital Settings (2)
Video Setup Page (3)
Preference Page (4)
Password Setup Page (5)
NOTE:
Some of the menu settings are only available in stop mode (depending
on the DVD).
30.11.2007 9:50:06 Uhr 30.11.2007 9:50:06 Uhr