AEG DVD 4528 TFT Instruction Manual And Guarantee page 51

Dolby Digital Setup
Video Setup
05-DVD4528TFT_GB.indd 51 05-DVD4528TFT_GB.indd 51
Dual Mono
The Audio output is normally in stereo. Here you have the possibility to
choose Mono-output instead of Stereo-output.
Stereo:
The Audio output is in Stereo (default).
L-Mono:
The Audio output is in Mono. In this case the signal of the „left"
stereo channel is transmitted to all speakers.
R-Mono:
The Audio output is in Mono. In this case the signal of the „right"
stereo channel is transmitted to all speakers.
Mix Mono:
The Audio output is in Mono. In this case the signal of the „both"
stereo channel is transmitted to all speakers.
Dynamic
The term „Dynamic" (Dynamic Range) describes the ratio of quietest and
loudest sound. If the dynamic range is very large, you will experience
very quiet and very loud sounds.
This may cause replay problems. Let us assume that you are watching a
DVD in a relatively loud environment. You can now increase the volume
to be able to hear also the very quiet passages, however with the
disadvantage that loud passages will be unacceptably loud. In this case
it would make sense to compress the dynamic range (i.e. reduce) and
increase the output volume at the same time.
FULL -1/8:
The dynamic range is compressed slightly (1/8) to full (FULL).
OFF:
The dynamic range is not compressed at all (default).
In this menu it is possible to perform various settings to adapt the video
signal.
English
51
30.11.2007 9:50:07 Uhr 30.11.2007 9:50:07 Uhr