Casablanca Four Seasons III Hugger Owner's Manual page 7

FOUR SEASONS
Step 11a. Attach the fan wires to the ceiling fixture
outlet box wiring by twisting the bare ends of the
wires together and then securing twith a wire nut.
Test that the connection is secure by pulling ou the
wire nut. Connect in this order:
• GREEN leads from the mounting plate and fan to
GROUND conductor of power source. Secure with
wire nut.
• WHITE wire from fan to white NETURAL wire in
ceiling fixture outlet box. Secure with wire nut.
• BLACK & BLUE wires from fan to black (*or red)
POWER wire in ceiling fixture outlet box. Secure
with wire nut.
Step 11b. Tuck the wires into the outlet box with
the wirenuts pointed upward
NOTE: If you are using an optional light
fixture with your fan, see Light Fixture
Instruction sheet for wiring.
Step 12. Match the four holes at both ends of the
mounting bracket with the four threaded studs of
the mounting plate. Assure that no wires are pinched.
Secure the fan assembly to the mounting plate us-
ing the washers and nuts removed in Step 6.
Step 13. Lift the body cover to the mounting plate and
align the two pairs of mounting holes in the fan body
with the threaded holes in the ceiling mounting plate.
6
™
CONNECTING THE WIRING
FINAL ATTACHMENT
FLAT WASHER
SELF LOCKING
NUT
BODY COVER ATTACHMENT
III HUGGER
2 GREEN
BODY COVER
2 WHITE
BLUE AND
2 BLACK
WIRE NUTS
(3)
BODY
MOUNTING
HOLES