3-12. Installing the button feeder
3-13. Installing the shooter
1. Move button feeder base q to the front and rear and
To vibrating bowl
To control box
(For vibrating bowl)
1. Raise the shooter lock pin w on the vibrating bowl q,
2. Secure the shooter e with thumb screw r on button
LK3-B448E MARK
left and right as necessary to install it by using hole
bolts w, spring washers e and washers r.
(And install ground wires ty.)
and secure the shooter e by inserting the pin w,
through the notch in the shooter.
feeder t.
/BA-16
II
3. Installation
13