Pt. Size - Canon imageCLASS 2300 Printer Manual

PT. SIZE

3
PITCH
3-14 PCL Menu
4.00 to 999.75; 12.00*
The Point Size setting is the measured vertical height of a typeface. There are 72
points per inch, so a 36 point font is half an inch high, measured from the top of
the uppercase letters to the tail of the letter y.
If the font selected in the FONTNUM setting is a bitmap or fixed spacing font, this
item will not appear for selection.
12.00
The printer font source is set for 12 point.
4.00 to 999.75
To increase the number in increments of 0.25, press [F3] (VALUE). To quickly
scroll through the numbers in increments of 1.00, hold down [F3] (VALUE).
To decrease the number in decrements of 0.25, press [BACK] ➞ [F3] (VALUE). To
quickly scroll through the numbers in decrements of 1.00, press [BACK] ➞ hold
down [F3] (VALUE).
0.44 to 99.99 cpi; 10.00*
Pitch is measured as the number of equally spaced characters per inch.
PITCH appears only if the font source you selected with FNTSRC (font source)
and FONTNUM (font number) above is a scalable font in a fixed pitch typeface.
Use this item to set the pitch of the font.
10.00
The selected pitch is 10 characters per inch.
0.44 to 99.99
To increase the number in increments of 0.01, press [F3] (VALUE). To quickly
scroll through the numbers in increments of 1.00, hold down [F3] (VALUE).
To decrease the number in decrements of 0.01, press [BACK] ➞ [F3] (VALUE). To
quickly scroll through the numbers in decrements of 1.00, press [BACK] ➞ hold
down [F3] (VALUE).