Canon imageCLASS 2300 Printer Manual page 33

5
F2
F2
6
2
F3
7
F3
8
F4
2-10 Operating the Menu
Press [F2] (ITEM) to display <CONFIG MENU>.
Press [F2] (ITEM) until <DENSITY> is displayed in the bottom
line.
Press [F3] (VALUE) to scroll through the values for the
DENSITY setting.
If you want to change the setting, press [F3] (VALUE) until the
value you want is displayed ➞ press [F4] (ENTER).
To use a darker setting, select a higher number. A darker setting will use more
toner. To use a lighter setting, select a lower number. A lighter setting will use less
toner.
If you want to exit or return to the item level of the menu without making any
F2
changes, press
without making any changes, press
printer back online without making any changes, press
NOTE
When the printer is offline and <PAUSED> is displayed on the LCD display, you can
cancel a job by pressing
(ITEM). If you want to exit or return to the menu level
F1
(MENU). If you want to bring the
(BACK) ➞
F4
(OK).
(ENTER).