Canon imageCLASS 2300 Printer Manual page 46

FORM
5 to 128 Lines; 60*
This determines the number of lines of text printed on one page. Change this
setting only if you have a software application that does not enable you to set the
page length, lines per page, or lines per inch.
FNTSRC
INTERNAL
This (Font Source) item shows you that the machine uses internal (resident) fonts.
FONTNUM
0 to 84; 0*
This (Font Number) setting enables you to set the default font by its number. The
printer assigns a font number to every typeface. Print a PCL Font List to see the
numbers assigned to the fonts. The font number (Font #) is the first column in the
list.
0
Courier is selected unless you change the setting.
1-84
To increase the number, press [F3] (VALUE). To quickly scroll through the
numbers in increments of 10, hold down [F3] (VALUE).
To decrease the number, press [BACK] ➞ [F3] (VALUE). To quickly scroll through
the numbers in decrements of 10, press [BACK] ➞ hold down [F3] (VALUE).
PCL Menu 3-13
3