Screen Size Adjustment - Canon LV-S3 Owner's Manual

Screen Size Adjustment

This projector has a picture screen resize function, which enables you to display the desirable image size.
1 Press MENU button to display the On-Screen Menu. Press
Point 7 8 buttons to move the red frame pointer to Screen
Menu icon.
2 Press Point d button to move the red frame pointer to the
function that you want to select. Then press SET button.
Normal
Provides an image to fit screen size.
True
Provides image in its original size. When the original image size is
larger than screen size ( 800 x 600 ), this projector enters "Digital
zoom +" mode automatically.
Wide
Provides image to fit wide video aspect ratio (16 : 9) by expanding
image width uniformly. This function can be used for providing a
squeezed video signal at 16 : 9.
Digital zoom +
When Digital zoom + is selected, the On-Screen Menu disappears
and the message "D. Zoom +" is displayed. Press SET button to
expand image size. And press Point
image. The panning function can work only when the image is larger
than screen size.
A projected image can be also expanded by pressing D.ZOOM
button on the remote control unit.
Digital zoom –
When Digital zoom – is selected, the On-Screen Menu disappears
and the message "D. Zoom –" is displayed. Press SET button to
compress image size.
A projected image can be also compressed by pressing D.ZOOM M
button on the remote control unit.
To cancel Digital Zoom +/– mode, press any button except D.ZOOM
ed , SET and Point buttons.
buttons to pan the
ed7 8
e
SCREEN MENU
Move the red frame to the function
and press SET button.
Note:
– This Screen Menu cannot be operated when
"720p (HDTV)", "1035i (HDTV)" or "1080i
(HDTV)" is selected on PC System Menu. (
– True and Digital zoom +/– cannot be selected
when "480i ", " 575i ", " 480p ", " 575p " is
selected on PC System Menu (
– This projector cannot display any resolution
higher than 1280 X 1024. If your computer's
screen resolution is higher than 1280 X 1024,
reset the resolution to the lower before
connecting projector.
– The image data in other than SVGA (800 x 600)
is modified to fit the screen size in initial mode.
– The panning function may not operate properly
if the computer system prepared on PC Adjust
Menu is used.
Computer Input
Screen Menu
P23 ).
P23 ).
29