No Show Function; P-Timer Function; Sound Adjustment - Canon LV-S3 Owner's Manual

No Show Function

Press NO SHOW button on the remote control unit to black out the
image. To restore to normal, press the NO SHOW button again or
press any other button. When a projected image is captured and set
as "User" in the Logo item in the Setting menu (
changes each time you press the NO SHOW button as follows :
black out ➜ the captured image ➜ normal ➜ ......

P-Timer Function

Press P-Timer button on the remote control unit. The timer display
"00 : 00" appears on the screen and the timer starts to count time (00
: 00 ~ 59 : 59).
To stop P-Timer display, press the P-TIMER button. And then, press
P-TIMER button again to cancel P-Timer function.

Sound Adjustment

Direct Operation
Volume
Press VOL (+/–) button on the remote control unit or on the top
control to adjust volume. The volume dialog box appears on the
screen for a few seconds.
VOL (+) button to increase volume, and VOL (–) button for
decreasing.
Mute
Press MUTE button on the remote control unit to cut off sound. To
restore sound to its previous level, press MUTE button again or press
VOL (+/–) button.
Menu Operation
1 Press MENU button to display the On-Screen Menu. Press Point
7 8 buttons to move the red frame pointer to SOUND Menu
icon.
2 Press Point d button to move the red frame pointer to the item
that you want to select, and then press SET button.
Volume
To increase volume, press Point
decrease volume.
Mute
Press Point buttons to mute sound. Dialog box display is changed
7 8
to "On" and sound is muted. To restore sound to its previous level,
press Point 7 8 buttons again.
P36 ), the screen
8 button, and press Point 7 button to
Message disappears after 4 seconds.
Indicates approximate
volume level.
Press MUTE button to set
Mute function On or Off.
The display disappears after 4 seconds.
SOUND MENU
Indicates approximate
volume level.
Close Sound Menu.
Basic Operation
Sound Menu icon
21