Computer Input Source Selection - Canon LV-7585 User Manual

Input Selection

Computer Input Source Selection

Menu Operation
WHEN SELECTING INPUT 1 (COMPUTER INPUT TERMINALS )
1
Press the MENU button to display the On-Screen Menu. Use
the Point 7 8 buttons to move the red frame pointer to the
INPUT Menu icon.
2
Use the Point ed buttons to move the red arrow pointer to
the desired input and then press the OK button. The Source
Select Menu appears.
3
Use the Point ed buttons to select the desired source and
then press the OK button.
RGB (PC analog)
When your computer is connected to the INPUT 1 (ANALOG)
terminal, select RGB (PC analog).
RGB (PC digital)
When your computer is connected to INPUT 1 (DIGITAL)
terminal, select RGB (PC digital).
✔
Note:
• INPUT SOURCE changes if the INPUT 1 button on the remote
control unit is pressed.
• HDCP (High-bandwidth Digital Content Protection) is a system
for protecting digital entertainment content which is delivered by
DVI (Digital Visual Interface) from being copied. T he specification
of HDCP is decided and controlled by Digital Content Protection,
LLC. Should the specification be changed, this projector may not
display the digital content protected by HDCP .
WHEN SELECTING INPUT  (5 BNC INPUT jACKS )
When connecting the computer output [5 BNC Type (Green,
Blue, Red, Horiz. Sync, and Vert. Sync.)] from the computer
to G, B, R, H/HV, and V jacks:
RGB
When your computer is connected to the INPUT 2 (5 BNC
INPUT JACKS) terminal, select RGB.

INPUT MENU
Input Menu icon
Move the pointer (red arrow) to Input
1 and press the OK button.
Input 1
INPUT MENU
INPUT Menu icon
Move the pointer (red arrow) to Input
2 and press the OK button.
Input 
Source Select Menu
Move the pointer (red
arrow) to RGB and press the
OK button.
Source Select Menu
Move the pointer (red
arrow) to the desired source
and press the OK button.