Advertisement
Note
OpenTX software is very powerful, and has a large number of programming
and mixing functions. Please visit the links below for more detailed
instructions：
https://www.open-tx.org and http://open-txu.org/
Specifications
Size: 160*130*60mm
Weight: 266g
Frequency: 2.400GHZ-2.480GHZ
RF Module: Multi-Protocol Module Compatible Single chip (CC2500)
Protocol Options: All CC2500 – Frsky, S-FHSS, RadioLink, Graupner
HoTT and more*
Transmission power: 20dbm
Antenna gain： 2db
Range: > 1km @ 20dbm (depending on the receiver)
Battery: Built in 3.7v 1000mah Lithium battery
Charging: Built in USB-C charging
Firmware: OpenTX - Multiprotocol-TX-Module
Channels: Up to 16 channels (depending on the model / receiver)
Screen: Clip on 128x64 LCD and OpenTX control module
Gimbal: High-precision quad ball bearing HALL Sensor gimbal
Voice support: Yes (SD Card required)
* Visit https://www.multi-module.org/ to learn more
Warranty and Support
If there is any problem with your remote-control hardware, please keep
the proof of purchase and contact the retailer where you purchased the
TX12. Technical support can be found at https://www.radiomasterrc.com
Or join our Facebook group for community support https://www.face-
book.com/radiomasterrc
4
Advertisement
