Download Print this page

Safety Notice - RadioMaster T8 Pro User Manual

Hide thumbs Also See for T8 Pro:

Advertisement

Introduction
Thank you for purchasing the RadioMaster T8 PRO 2.4g remote control system.
The system is powerful and versatile and can be used by beginners to
professionals. In order to ensure the correct and safe use of this product, please
read this manual carefully before use. The information contained in this manual
is subject to change without notice.
-RadioMaster team.

Safety notice

Many remote-control models are equipped with powerful motors and sharp
propellers. When using or maintaining models, proceed with caution. When
performing assembly or maintenance, make sure to disconnect the power to the
model and remove the propellers.
Do not operate the T8 remote-control system under the following conditions:
• In severe weather or strong wind conditions, such as rain, hail, snow, storms or
highly electromagnetic environments.
• In any situation where visibility is limited.
• In areas where people, property, high-voltage power lines, public roads,
vehicles or animals may be present.
• If you feel tired or unwell, or under the influence of drugs or alcohol.
• If the remote control or model seems to be damaged or not working properly.
• In areas with high 2.4GHz interference or where 2.4GHz radio is prohibited.
• When the battery voltage is too low.
• In areas where local regulations prohibit the use of aviation models.
Firmware & Manual Download
The T8 PRO comes factory installed with the latest stable release of OpenTX.
You do not need to update the firmware unless there is a special or specific
function released that you require. We recommend checking this before updating
and do no up date if not required. DO NOT attempt to update your radio if you
are unsure how to do it correctly. Incorrect Firmware updates may render the
radio inoperable and will not be coved under warranty.
A more detailed manual can be downloaded from our website. Visit www.radio-
masterrc.com for the latest information. For news on firmware please visit
https://www.open-tx.org
1

Advertisement

loading