Nikon COOLPIX 5900 Repair Manual page 66

Hide thumbs Also See for COOLPIX 5900:

4. Initial image data writing and Firmware upgrading

Write the data of initial images, and go on to upgrade the firmware.

Device

・ AC adapter (EH-62B)　

・ Upgrading SD card X 1　

[How to create an upgrading SD card]

1) Format SD card on PC.

2) Create a folder named "firmware" in the root directory of the SD card.

3) Copy "firmware.bin" into the created folder.

4) Copy "nanddat.bin" into the root directory of the same SD card.

Note) When only firmware upgrading is performed without replacing CP-1 PCB, copying "nanddat.bin" into the SD card is

NOT necessary.

Procedure　

・ Turn the camera OFF and connect the AC adapter.

・ Insert the upgrading SD card into camera.

・ Set the mode dial to "SETUP" and turn power ON.　

・ Highlight and select "Firmware version" to display the menu for data-writing of initial images. (Fig.1)

・ Select "Yes", and press the decision button to carry out data-writing of initial images. (Fig.2)

Note: Do NOT turn power OFF during upgrading.　　

(Fig.1)

(Fig.2)

- A36 ･ E5900 -

VAA34001-R.3658.A