Nikon COOLPIX 5900 Repair Manual page 17

DC/DC PCB
・Remove the solder of the armature.
・Remove the two screws (816).
・Remove the DC/DC PCB from the main PCB connector.
・The strap eyelet (381) can be removed.
Main PCB
・Remove the FPC.
・Perform unsoldering.
・Remove the screw (803).
・Remove the two screws (818).
・Remove the lug plate (392).
・Remove the main PCB (B1001).
・Remove the lug plate (397).
Strap eyelet (381)
DC/DC PCB
Position of the main PCB connector (Rear surface)
FPC
- D11 ･ E5900 -
Screws (816)
Armature
VAA34001-R.3658.A