Nikon COOLPIX 5900 Repair Manual page 103

Item
LCD and others
Monitor LCD View
Visual field ratio
Defect in pixels
Self / AF LED
Self-display operation
Operation time:
10 seconds
LED blinks/lights
・ The reproduction of W, B and RGB must be performed without a hitch.
・ Through-the-monitor image: 94 to 100%
・ Play-back image:
・ Defect in lines: There must be no defect.
・ Defect in points: The defect quantity must not exceed the values
as shown in the table below.
Bright pixel
Zone A 0
Zone B 1
Total 1
Bright pixel: Visible through the 2% ND filter
Dim pixel: Visible through the 5% ND filter
Dark pixel: Darkly visible
Continuous bright/dim pixel: There must be no continuous bright pixel.
Continuous dark pixel: There must be no continuous dark pixel.
(Perform reproduction for each single color of R, G, B and white
and check visually.)
1
B
B: Valid display range
A: Area of 16/36 when measured from the center of B
・ 10 ± 1 second
・ Blinks for 9 seconds and lights for 1 second.
- R7･ E5900 -
Criteria
98 to 100%
Dim pixel Dark pixel
2 2
2 2
2 2
4 1
1
A 4
1
VAA34001-R.3658.A
Applied tool(s)
Visual observation
Visual observation
Stop watch