VAA34001-R.3658.A
Assembly of rear cover
・Set the multi-selector (242).
・Fit the switch rubber (244) to the convex section and set it.
・Set the determining button (241).
・Set the speaker (1025) with the cord facing downward.
・Set the determining button spring (245).
・Set the rear SW unit (1018).
・Fit the rear SW unit (1018) to the two convex sections.
・Tighten the six screws (819).
・Adhere the rear FPC insulating seal (719).
Speaker (1025)
Switch rubber (244)
Determining button (241)
Multi-selector (242)
Screw (819)
Determining button spring (245)
Rear SW unit (1018)
Rear FPC insulating seal (719)
Screw (819)
- A32 ・ E5900 -