Surface Panels - Suggested Settings - Calrec TYPE R Startup Manual

SURFACE PANELS - SUGGESTED SETTINGS

The suggested settings for each surface panel connected to the first mixer in a Type R system are shown below. Use the
tables below to configure your surface panels and to record the serial number, fader range and label details of each panel
for later reference. After configuring the surface panels, you may want to attach labels to them. A blank label sheet is
provided with the Type R core for this purpose. A printer template for this Label sheet is available to distributors on the
Calrec Website.
Fader
Panel Fader Range ( e.g. 1-6 )
1st
2nd
3rd
4th
5th
6th
7th
8th
Soft Type
Panel (LSP/SSP)
1st
2nd
3rd
4th
5th
6th
7th
8th
24 TYPE R
Radio Production System
Serial Number
Panel Label
( e.g. Guest 1 ) Serial Number
Panel ID
[switch setting] IP Address
1 [00000001] 172.17.101.1
2 [00000010] 172.17.101.2
3 [00000011] 172.17.101.3
4 [00000100] 172.17.101.4
5 [00000101] 172.17.101.5
6 [00000110] 172.17.101.6
7 [00000111] 172.17.101.7
8 [00001000] 172.17.101.8
Panel ID
[switch setting] IP Address
11 [00001011] 172.17.101.11
12 [00001100] 172.17.101.12
13 [00001101] 172.17.101.13
14 [00001110] 172.17.101.14
15 [00001111] 172.17.101.15
16 [00010000] 172.17.101.16
17 [00010001] 172.17.101.17
18 [00010010] 172.17.101.18
**Subnet masks are displayed in CIDR notation
Subnet
mask**
/16
/16
/16
/16
/16
/16
/16
/16
Subnet
mask**
/16
/16
/16
/16
/16
/16
/16
/16
Start Up Guide