Access Assist Setup And Create A New Show - Calrec TYPE R Startup Manual

8. ACCESS ASSIST SETUP AND CREATE A NEW SHOW

To create a new Show follow these steps:
1. Open Google Chrome, type 172.16.255.25 into the address bar and press enter to navigate to the Assist
landing page.
2. In the menu on the left-hand side, navigate to Shows & snapshots then Shows in the sub-menu.
3. In the footer menu select New, the Create a Show dialogue will be displayed.
Select the Default_Show template show and click Next.
4. Fill in the form to label and describe your Show, then click Create New Show.
You will be automatically redirected to the Fader layout screen.
5. From here you may begin to configure your mixer with DSP paths, routing etc.
However we would recommend that you continue to complete the setup before doing this.
Please refer to the Type R Assist Manual or Type R Assist and Console Operation Manual for more guidance.
15