Table of Contents
Advertisement
The default IO box and core AoIP network interface
settings are shown in the table above right:
All IO box, core AoIP network interfaces and Connect
server AoIP interfaces must have unique IP addresses,
so if multiple AoIP devices in the same IO box type or
multiple cores need to be connected, it is essential that
all IP addresses are reconfigured accordingly first.
Important: Currently, the IP addresses and
subnet masks assigned to the core's Connect
server are fixed. It will be possible to edit these
settings from software release V1.2.
Until then, all AoIP devices which are to be
discovered and controlled by Connect must
reside in the 192.168.30/24 (Primary) and
192.168.31/24 (Secondary) subnets.
20 TYPE R
Radio Production System
IO BOX & CORE AOIP NETWORK INTERFACE SETTINGS
Box type /Core
Primary core
Connect Server
Combo
Analogue
AES
Primary Core AoIP1
Secondary Core AoIP2
AoIP port
IP address & Subnet mask**
Pri (I/F 5)
192.168.30.100/24
Sec (I/F 6)
192.168.31.100/24
AoIP - Pri
192.168.30.1/24
AoIP - Sec
192.168.31.1/24
AoIP - Pri
192.168.30.2/24
AoIP - Sec
192.168.31.2/24
AoIP - Pri
192.168.30.3/24
AoIP - Sec
192.168.31.3/24
AoIP 1 - Pri
192.168.30.4/24
AoIP 1 - Sec
192.168.31.4/24
AoIP 2 - Pri
192.168.30.64/24
AoIP 2 - Sec
192.168.31.64/24
Start Up Guide
Advertisement
Table of Contents
