Maintenance; General Description - KPS PA40 Instruction Manual

KPS-PA40 • Digital clamp meter
be followed.
• Always inspect your meter and test leads for any sign of damage or abnor-
mality before every use. If any abnormal conditions exist (i.e. broken test
leads, cracked cases, display not reading, etc.),do not attempt to take any
measurements.
• Do not expose the instrument to direct sunlight, extremetemperature or
moisture.
• Never ground yourself when taking electrical measurements.Do not touch
exposed metal pipes, outlets,fixtures, etc.,which might be at ground po-
tential. Keep your body isolated from ground by using dry clothing; rubber
shoes,rubber mat, or any approved insulating material.
• You always are careful when working with voltages above 60V de or 30V ac
rms.Keep fingers behind the probe barriers while measuring.
• Never use the meter to measure voltages that might exceed the maximum
allowable input value of any function.
4.

MAINTENANCE

• Never touch exposed wiring, connections or any live circuit when attempting
to take measurements.Antes de abrir la carcasa, desconecte siempre los
cables de prueba de todos los circuitos con alimentación.
• Before opening the case,always disconnect test leads from all energized
circuits.
• Do not use abrasives or solvents on the meter.To clean it using a damp cloth
and mild detergent only.
• Qualified and trained service technicians should only perform calibration and
repair of the meter.
• Do not attempt calibration or service unless trained and another person c
pable of rendering first aid and resuscitation is present.
5.

GENERAL DESCRIPTION

The meter is an autorange professional AC/DC clamp meter with 3999 counts
For measuring DC andAC voltage,DC and AC current, Resistance, Capac
tance, Temperature, Frequency, Duty Cycle, Diode and Continuity Test with
battery operated.
6. DESCRIPCIÓN DEL PANEL
1 Transformer jaws. Pick up the AC or DC current flowing through the con-
17