Product Overview; Operation; Controls - Exmark COMMERCIAL 30 Operator's Manual

Product Overview

Figure 3
1. Grass bag
2. Handle
3. Drive Bail
g235121
4. Blade Control Bail
5. Discharge door
6. Front wheel height
adjuster

Operation

Note: Determine the left and right sides of the
machine from the normal operating position.

Controls

Become familiar with all the controls before starting
the engine and operating the machine.
Blade Control Bail
Located on the upper handle as shown in Figure 4.
When the blade control bail is depressed, the system
senses that the operator is in the normal operator's
position.
When the blade control bail is released, the system
senses that the operator has moved from the normal
operating position and will stop the blade.
1. Blade control lock lever
2. Blade control bail
3. Handle
4. Drive bail
Self-Propel Drive Bail (Self-Propelled
Units Only)
Located on the upper handle as shown in Figure 4.
When the self-propel drive bail is squeezed against
the handle, the unit ground speed will change based
9
Operation
Figure 4
g235252