Technical Data; Disposal - AEG SR 4345 CD Instruction Manual

English
28
5. Press once the button to stop the playback while retain-
ing the program. The display PROG. will stay lit.
6. To play the programme back again, press the
7. To delete the program, press the button twice. The
display PROG. goes out.
The device stops automatically once the entire sequence of
programmed tracks is completed. The display PROG. goes
out and the programmed sequence will be deleted from the
memory.
Cleaning and Maintenance
• Always remove the mains plug before cleaning the
machine.
• Any marks on the surface can be wiped off with a slightly
damp cloth without any additives.
Troubleshooting
Symptoms Course
CD can not be CD is not inserted
played back. or inserted incor-
rectly.
Batteries too weak. Insert new batteries
CD jumps dur- Check the disc for
ing playback. fingerprints, dirt or
scratches.
The unit does The unit is blocked
not work. and "hangs".

Technical Data

Model: ............................................................................ SR 4345 CD
Power supply: ................................................................ 230 V, 50 Hz
Battery operation: ..................................6 x 1.5 V, Type UM2/R 14
Power consumption:.................................................................12 W
Protection class: ................................................................................II
Net weight: .............................................................................1.29 kg
Radio section:
Frequency ranges: ........................VHF /FM 88 ~ 108.0 MHz
Subject to technical changes without prior notice!
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance
with the latest safety regulations.
button.

Disposal

Meaning of the "Dustbin" Symbol
Protect our environment: do not dispose of electrical equip-
ment in the domestic waste.
Please return any electrical equipment that you will no longer
use to the collection points provided for their disposal.
This helps avoid the potential effects of incorrect disposal on
the environment and human health.
This will contribute to the recycling and other forms of reutili-
sation of electrical and electronic equipment.
Information concerning where the equipment can be dis-
posed of can be obtained from your local authority.
Solution
Ensure that the disc is
inserted with the label
facing upwards.
or operate the device
with the mains lead.
Check the disc for
fingerprints, dirt or
scratches.
Disconnect the mains
plug for approximately
5 seconds. Then switch
the unit back on.