LaserLiner PowerPlane-Laser 3G Manual page 13

Make sure there are no conductive objects in the vicinity of the
!
battery contacts. Short-circuiting of these contacts can cause burn
injuries or fire.
!
Do not open the rechargeable battery. This could cause short-circuits.
2
Inserting lithium-ion rechargeable batteries
Open the battery compartment and
insert the lithium-ion batteries (4 x 3.7 V,
type AA) corresponding to the symbols.
Be sure to pay attention to polarity.
The device must only be used
!
with the supplied rechargeable
batteries!
3
Horizontal and vertical levelling
Release the transport restraint, set slide switch (3) to "ON".
The horizontal laser line appears. The laser lines can be switched
on individually with the selection button.
LASER
The transport restraint must be released for horizontal and vertical
!
levelling. The laser lines flash and a signal sounds as soon as the
device is outside the automatic levelling range of 2.5°. Position
the device such that it is within the levelling range.
LASER LASER
PowerPlane-Laser 3G
–
+ –
LASER LASER
+
13
GB