Canon PIXMA iP6000D Printing Manual page 86

*1
To resume printing, you can press the RESUME
Continue Continue. Continue Continue
*2
The waste ink absorber absorbs ink used for cleaning.
PictBridge or Canon Bubble Jet Direct compatible digital cameras can be
Notes
connected to your printer for direct printing.
This section describes errors that are indicated on Canon-brand PictBridge-
or Bubble Jet Direct-compatible cameras. The error messages and operations
may vary depending on the camera you are using.
For errors on non-Canon PictBridge-compatible cameras, count the number
of flashes the POWER
the error and take the appropriate action. For details, refer to "Handling Error
Messages" in the User's guide .
Messages Messages Messages
Connecting a digital camera not compatible with PictBridge or Bubble Jet
Direct makes the POWER
case, unplug the cable connecting the camera to the printer, and press the
RESUME button on the printer. RESUME RESUME RESUME
A communication time out occurs if printing takes a long time or if it takes
too much time to send data. This may stop printing. In such a case,
disconnect the cable between the printer and the camera, press the RESUME
button on the printer, and reconnect the cable between the printer and the
camera. Then, turn the camera on, if it does not automatically turn on. If the
problem is still unresolved, select some other photo and check if it can be
printed or not.
The print head nozzles may be clogged if printing becomes faint or colors are
incorrect. See "When Printing Becomes Faint or Colors are Incorrect
page 70.
If the paper is curled or its surface is scratched during printing, make sure
that you are using the correct type of paper. If this error occurs even when
you are using the correct type of paper, select Thick paper
menu. See "If the printed surface is still scratched:
To disconnect the cable connected between the digital camera and printer,
follow the procedure below.
1. Disconnect the cable from the printer.
2. Turn off the digital camera.
3. Disconnect the cable from the digital camera.
When disconnecting the cable, be sure to hold the connector by its sides.
For the errors indicated on the camera and their solution, also refer to the
user's manual of the camera. For other troubles on the digital camera,
contact the manufacturer.
85
RESUME button on the printer instead of selecting RESUME RESUME
POWER lamp on the printer makes and check for the cause of
POWER POWER
POWER lamp on your printer flash nine times. In such a
POWER POWER
When Printing Becomes Faint or Colors are Incorrect" on
When Printing Becomes Faint or Colors are Incorrect When Printing Becomes Faint or Colors are Incorrect
If the printed surface is still scratched:" on page 80.
If the printed surface is still scratched: If the printed surface is still scratched:
Handling Error
Handling Error Handling Error
Thick paper in the Thick paper Thick paper
Thick paper Thick paper Thick paper
RESUME
RESUME RESUME
Thick paper