Canon PIXMA iP6000D Printing Manual page 80

Cannot See the Display Properly on the LCD/Cannot See the Display
on the LCD
Possible Cause
Cannot see the display properly
on the LCD/the display on the
LCD is illegible
Cannot see the display on the
LCD
Ink Does Not Come Out/ Printing is Blurred/Colors are Wrong/White
Streaks
Possible Cause
Ink tank is not seated properly/
Ink tank is empty
Incorrect paper type
Print head nozzles clogged or
shifted
Media not loaded print-side up
The inner cover is open
79
Adjust the contrast of the LCD in the Contrast
Contrast of the LCD" on page 47.
The LCD may be in the screen-saver mode. Press the OK
again.
* If you leave the printer more than 5 minutes without using any button on the
operation panel, the LCD goes into the screen-saver mode automatically.
Check that the ink tanks are firmly seated in the print head and reseat them if
necessary.
• Check to see if all the orange tape has been removed as shown in (1). If a part of the
orange tape remains as shown in (2), remove it.
If ink tank is empty: See "Replacing an Ink Tank" on page 66.
On the operation panel, confirm that the Media Type
loaded.
Print the nozzle check pattern to check for uneven ink output.
When a specific color is missing from the nozzle check pattern, clean the print head.
• If ink supply is uneven: See "Print Head Cleaning" on page 73.
• If straight lines are shifted: See "Aligning Print Head - Auto head align" on page 75.
Check that your paper is loaded with the correct print side facing up.
Note Follow the instructions packaged with your specialty media for loading
and handling.
Close the inner cover and click the RESUME
Ensure that the inner cover is completely closed, since if it is not, you cannot print
because the paper will not feed properly.
Try This
Contrast menu in the Tool Box Contrast Contrast Tool Box Tool Box Tool Box. See "Adjusting
OK button to turn on the LCD
OK OK
Try This
Media Type selected matches the paper Media Type Media Type
RESUME RESUME button on the printer. RESUME