Canon PIXMA iP6000D Printing Manual page 79

Message
Unsupported device connected.
Please remove and press
Resume.
Cassette is selected.
Switch to the sheet feeder.
Error code
* The waste ink absorber absorbs ink used during cleaning.
Adjusting the Print Head Manually
Note
If the automatic print head adjustment does not work or if you wish to adjust
the print heads manually, follow the procedure below.
1. With the printer on, load two sheets of Letter-sized plain paper in the
2. Press the Menu
3. Use the
4. Use the
Disconnect the camera connection cable, press the RESUME
the cable once more.
If the error is still unresolved, there is a possibility that you are using a digital camera
or digital video camcorder that is not supported by this printer.
Connect only digital cameras or digital video camcorders that are compatible with this
printer.
When paper feeding is set to be done from the cassette, paper cannot be fed from the
sheet feeder.
Turn off the printer, remove the power cord plug from the outlet and leave the printer for
about 10 minutes. Then plug the power cord back in, and turn on the printer again.
If the same error persists, contact the Customer Care Center.
sheet feeder.
Menu button.
Menu Menu
buttons to select Tool Box
buttons to select Manual head align
button.
5. Use the
OK button. OK
OK OK
6. The message of "Did the pattern print properly?" is
displayed on the LCD.
Use the
OK button. OK
OK OK
7. Examine the printed pattern and enter the number of
column "A" with fewest white stripes using the
buttons.
8. Press the OK
9. Use the
10.Repeat Steps (7) through (8) and enter the pattern
numbers up to column "G".
11.After entering the pattern numbers up to column "G",
press the OK
Try This
Tool Box and then press the OK Tool Box Tool Box
Manual head align Manual head align and then press the OK Manual head align
buttons to select Yes
buttons to select Yes
OK button.
OK OK
button and move the cursor to column "B".
OK button. OK OK
RESUME button, and then connect RESUME RESUME
OK button. OK OK
Yes and then press the Yes Yes
Yes and then press the
Yes Yes
OK OK OK
78