Canon PIXMA iP6000D Printing Manual page 69

4
Prepare a replacement tank.
(1) Unpack the new ink tank and pull off the orange tape.
(2) Remove the orange protective cap from the bottom of the ink tank and discard it.
Important
5
Install the ink tank.
(1) Insert the ink tank in the print head holder.
(2) Press on the "PUSH" mark until the ink tank snaps firmly into place.
Be sure to remove the clear film from the ink tank in the exact order
shown in step 4-(1), as failure to follow this step may cause the ink to
leak and stain your clothes and hands.
Do not squeeze the side of ink tanks as this may cause the ink to leak
out and stain your clothes and hands.
Do not re-attach the protective cap once you have removed it.
Once the protective cap is removed, do not touch the open ink port.
Ensure that all the orange tape has been peeled off along the
perforation. If there remains a part of the orange tape, ink may not be
ejected correctly.
68