ETEKCITY EAM-DT1 Manual page 7

Table of Contents

Advertisement

Risk of burns, fire, electric shock, and other injury: (cont.)
Do not operate where aerosol (spray) products are being used or where oxygen is being
administered.
To disconnect, turn off all controls, then remove plug from outlet.
Do not use this mattress to support video equipment such as televisions or computer monitors.
Unplug and correctly store cord in compartment when not in use.
CAUTION: This mattress uses an electrical air pump with thermal protection. The pump contains
parts that cannot be repaired or serviced. To avoid risk of electric shock, do not open the air pump
casing. If the air pump is not working correctly, contact Customer Support (see page 17).
Do not use the pump in enclosed spaces that are not well-ventilated. Make sure there is clearance of
at least 2 inches from any wall or object while using the pump.
Do not use high pressure or compressed air inflation systems with this mattress, and do not use
devices that blow hot air (such as hair dryers) to inflate this mattress.
Do not use the pump around explosive or flammable vapor.
Do not place any part of the pump or cord in water or other liquids.
To reduce the risk of electric shock, this mattress has a polarized plug (one prong is wider than the
other) which fits into a polarized outlet only one way. If the plug does not fit, reverse the plug. If it
still does not fit, do not use the plug in that outlet. Do not alter the plug in any way.
Do not exceed the weight limit for the mattress (see page 3).
Not for commercial use. Household use only.
SAVE THESE INSTRUCTIONS
WARNING
!
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eam-dq1

Table of Contents