Related Manuals for ETEKCITY EAM-DT1
Summary of Contents for ETEKCITY EAM-DT1
- Page 1 Air Mattress Model: EAM-DT1 & EAM-DQ1 Questions or Concerns? support@etekcity.com • (855) 686-3835...
- Page 2 Thank you for purchasing the EAM-DT1/EAM-DQ1 Air Mattress by Etekcity. If you have any questions or concerns, please reach out to our helpful Customer Support Team at support@etekcity.com. We hope you enjoy your new air mattress! BECOME AN ETEKCITIZEN Get exclusive deals, giveaways, and product registration.
-
Page 3: Table Of Contents
Table of Contents Package Contents Package Contents 1 x Air Mattress Specifications 1 x Mattress Storage Bag Safety Information 2 x Vinyl Plastic Repair Kits Function Diagram 1 x User Manual Initial Setup 1 x Information Card Operation 1 x Warranty Card •... -
Page 4: Specifications
Specifications Model EAM-DT1 EAM-DQ1 Dimensions Twin Queen 75 x 39 x 18 in / 191 x 99.1 x 45.7 cm 80 x 60 x 22 in / 203 x 152 x 56 cm Max Weight Capacity 550 lb / 249.5 kg 650 lb / 294.8 kg... -
Page 5: Safety Information
Safety Information To reduce the risk of personal injury, please read and follow all instructions and safety guidelines in this manual. DANGER Risk of electric shock: Always unplug this mattress before cleaning. WARNING Risk of suffocation: Never allow an infant 15 months or younger to sleep on an inflatable mattress. Infants can suffocate on an under-inflated or deflated mattress, on bedding, or by being trapped between the mattress and another surface. - Page 6 • Only use this mattress as described in this manual. Do not use attachments not recommended by Etekcity. • Do not use this mattress if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or if electrical parts have been dropped into water.
- Page 7 WARNING Risk of burns, fire, electric shock, and other injury: (cont.) • Do not operate where aerosol (spray) products are being used or where oxygen is being administered. • To disconnect, turn off all controls, then remove plug from outlet. •...
-
Page 8: Function Diagram
Function Diagram Air Mattress (felt side facing up) Power Cord Power Cord Storage Compartment Air Pump Control Dial Control Dial Air Valve Two-Part Manual Air Valve Inner Manual Air Valve Outer Manual Air Valve... -
Page 9: Initial Setup
Initial Setup Operation Inflating Remove the mattress from its packaging. Unfold the mattress and place it with the felt side facing Open the power cord storage compartment and Inflate the mattress (see page 9). connect the plug to a 110V–120V AC outlet. Let the mattress rest for 8–12 hours before Make sure the manual air valve is fully closed. -
Page 10: Manual Inflating
Manual Inflating When the mattress has reached the desired firmness, turn the control dial to “Off”. Make sure the built-in air pump is turned Note: off. The control dial arrow for the built-in air • Make sure the control dial arrow is aligned pump should be aligned with the “Off”... -
Page 11: Deflating
Deflating Storing Plug in the cord and turn the control dial Fully deflate the mattress. counterclockwise to “Deflate”. [Figure 3.1] Make sure the mattress is clean and dry and that the control dial is in the “Deflate” position. Note: You can also deflate the mattress by fully [Figure 3.1] opening the inner manual air valve. - Page 12 Figure 4.2 Figure 4.1 Figure 4.3 Figure 4.4 Figure 4.5...
-
Page 13: Care And Maintenance
Care and Maintenance • Air temperature will affect the internal pressure of an air mattress. Inflate or deflate the mattress as needed. Cleaning ° If the temperature goes down (such as on a cold night), the air in the mattress will •... -
Page 14: Repairing Leaks
• Do not expose extreme temperatures (hot or Cut the vinyl patch to the required size for the cold). damaged area. • Avoid putting too much pressure on small parts Remove patch from the paper backing. Press of any air mattress. This includes sitting or firmly over the damaged area. -
Page 15: Troubleshooting
Troubleshooting My mattress deflated by a small amount (10– 15%). • If your air mattress is new, then fully inflate My mattress has a chemical smell. and deflate the mattress once. This should fully stretch out the PVC vinyl material and the •... -
Page 16: Servicing Of Double-Insulated Products
Servicing of Double-Insulated Products In a double-insulated product, 2 systems of insulation are provided instead of grounding. On a double- insulated product, grounding means is not provided and should not be added. Servicing a double-insulated product requires extreme care and knowledge of the system, and is to be done only by qualified service personnel. -
Page 17: Warranty Information
ALL EXPRESSED AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE Etekcity warrants all products to be of the highest quality in material, PERIOD OF THE LIMITED WARRANTY. craftsmanship, and service, effective from the date of purchase to the end of the warranty period. -
Page 18: Customer Support
If you encounter any issues or have any questions regarding your new product, please contact our helpful Customer Support Team. Your satisfaction is our goal! Customer Support Support Hours Etekcity Corporation Mon–Fri, 9:00 am–5:00 pm PST/PDT 1202 N. Miller St., Suite A Anaheim, CA 92806 *Please have your invoice and order number ready Email: support@etekcity.com... - Page 19 Connect with us @Etekcity...
- Page 20 Building on better living. v1.06...