Page 1
Air Mattress Model: EAM-ET1 & EAM-EQ1 Questions or Concerns? support@etekcity.com • (855) 686-3835...
Page 2
Thank you for purchasing the EAM-ET1/EAM-EQ1 Air Mattress by Etekcity. If you have any questions or concerns, please reach out to our helpful Customer Support Team at support@etekcity.com. We hope you enjoy your new air mattress!
Table of Contents Package Contents Package Contents 1 x Air Mattress Specifications 1 x Mattress Storage Bag Safety Information 2 x Vinyl Plastic Repair Kits Function Diagram 1 x User Manual Initial Setup 1 x Information Card Operation 1 x Warranty Card •...
Specifications Model EAM-ET1 EAM-EQ1 Dimensions Twin Queen 75 x 39 x 9 in / 91 x 99.1 x 22.9 cm 80 x 60 x 9 in / 203 x 152 x 22.9 cm Max Weight Capacity 450 lb / 204.1 kg 650 lb / 294.8 kg...
Safety Information To reduce the risk of personal injury, please read and follow all instructions and safety guidelines in this manual. WARNING Risk of suffocation: Never allow an infant 15 months or younger to sleep on an inflatable mattress. Infants can suffocate on an under-inflated or deflated mattress, on bedding, or by being trapped between the mattress and another surface.
Page 6
Close supervision is necessary when this mattress is used by or near children, invalids, or disabled persons. • Only use this mattress as described in this manual. Do not use attachments not recommended by Etekcity. • Do not use this mattress if it is damaged or not working properly. Contact Customer Support (see page 17).
Page 7
WARNING Risk of burns, fire, and other injury (cont.): • Do not operate where aerosol (spray) products are being used or where oxygen is being administered. • Do not use this mattress to support video equipment such as televisions or computer monitors. •...
Initial Setup Operation Remove the mattress from its packaging. Unfold Inflating the mattress and place it with the felt side facing Pull the tab to open the outer air valve. Connect Inflate the mattress (see page 9). the included air pump to the valve. [Figure 1.1] Let the mattress rest for 8–12 hours before...
Deflating and Storing Fully open the inner air valve and allow the mattress to fully deflate. [Figure 2.1] Make sure the mattress is clean and dry. Lay mattress with the felt side facing up. Fold the mattress. [Figures 2.2 – 2.5] Note: Fold the mattress loosely.
Care and Maintenance • Air temperature will affect the internal pressure of an air mattress. Inflate or deflate the mattress as needed. Cleaning ° If the temperature goes down (such as on a cold night), the air in the mattress will •...
Preventing Leaks Repairing Leaks Use the included vinyl plastic repair kits to repair Keep mattress away from sharp objects and leaks. rough surfaces. Note: Keep away from pets, as their claws will • If your mattress has lost only a small amount damage the mattress.
Troubleshooting My mattress deflated by a small amount (10– 15%). • If your air mattress is new, then fully inflate My mattress has a chemical smell. and deflate the mattress once. This should fully stretch out the PVC vinyl material and the •...
2 years from the Etekcity will not be liable for indirect, incidental, or date of original purchase. consequential damages in connection with the use of the product covered by this warranty.
If you encounter any issues or have any questions from authorized sellers that are subject to regarding your new product, please contact our Etekcity’s quality controls and have agreed to helpful Customer Support Team. Your satisfaction is follow its quality controls.
Page 17
FCC SDOC SUPPLIER’S DECLARATION OF CONFORMITY Etekcity Corporation hereby declares that this equipment is in compliance with the FCC Part 15 Subpart B. The declaration of conformity may be consulted in the support section of our website, accessible from www.etekcity.com...