Printing Maintenance; Replacing An Ink Tank - Canon i900D Series Quick Start Manual

Printing Maintenance

Printing Maintenance Printing Maintenance Printing Maintenance Printing Maintenance

Replacing an Ink Tank

When replacing an ink tank, check the model number very carefully.
The printer will not print properly if the wrong ink tank is used, or installed in
the incorrect position.
With this printer, ink tanks must be installed from the right in the order indicated below.
• Magenta: BCI-6M
• PhotoMagenta: BCI-6PM Photo
• Yellow: BCI-6Y
Knowing When to Replace Ink Tank
If an ink tank needs replacing, the Power
flash four times, as soon as printing begins. It is important to quickly identify the
empty tank using the BJ Status Monitor (Windows) or error messages (Macintosh) and
replace it.
Should missing characters or white streaks appear despite sufficient ink levels,
Note
refer to the section
page 32
The following message appears when ink is empty.
Printing will resume as soon as ink tank is replaced and the front cover is closed.
Empty ink tank
28
• Black: BCI-6BK
• Cyan: BCI-6C
• PhotoCyan: BCI-6PC Photo
Power Power Power lamp will change from green to orange and
"When Printing Becomes Faint or Colors are Incorrect When Printing Becomes Faint or Colors are Incorrect When Printing Becomes Faint or Colors are Incorrect When Printing Becomes Faint or Colors are Incorrect"
The ink tank with [X] symbol is out of ink.
Replace with a new ink tank.
• Click Cancel Printing
print job.
• Press the Resume
printing with an empty ink tank.
When printing is finished, replace the ink
tank immediately. If you continue printing
with an empty ink tank, it may cause a
problem.
• Menu screens will vary to some degree,
depending on your software environment.
Cancel Printing to cancel the current Cancel Printing Cancel Printing
Resume button to resume
Resume Resume
on