Install the Printer Driver (Windows
Install the Printer Driver (Window
Turn the computer on and LEAVE THE
PRINTER OFF .
NOTE: For Windows
XP or Windows 2000,
log on to Windows as an Administrator
insert the "Setup Software & User's
Guide" CD-ROM. The setup program should
NOTE: If the setup does not run
Start, then Run, then
type D:\msetup.exe, where D is your
Read the License Agreement, then click
Yes to continue.
When the main menu appears, click
When the Printer Port window appears,
TURN THE PRINTER ON. The software will
begin identifying the printer port being
When Terminate Installation window
appears, click OK.
Remember to register your
product. The serial number is located
on the inside of the printer, to the right
of the print head.
When the software menu appears, click
Install. Then follow the on-screen
appears, click OK, then Exit.
Click Yes if you are prompted to restart your
Install the Printer Driver (Macintosh
Turn on your Mac and your printer and
insert the "Setup Software & User's Guide"
Double-click the CD-ROM icon, then the
Mac OS X folder, then the
When the message "The software was
Double-click the i350 190.pkg or
Access your CD-ROM again. From the
i250 190.pkg icon.
Application folder, double-click on the
software to be installed.
When the "Authenticate" screen appears,
Follow the on-screen instructions. When the
enter your administrator name and
password, then click OK.
When the "Welcome to the BJ printer driver
Installer" screen appears, click Continue.
Read the Software License Agreement
and click Continue, then click Agree.
Select a destination for the printer driver
to be installed. Then click Continue.
Click Install. When a message asking for
your confirmation to proceed with the
installation, click Continue Installation.
" appears, click
" screen appears,
NOTE: Be sure to register your product.
The serial number is located on the
inside of the printer, to the right of the
IMPORTANT: To ensure highest
To ensure highest
Align the Print Head
Align the Print Head. . . .
Align the Print Head
Place a sheet of blank paper in the
Start the alignment procedure.
select Control Panel, Printers and
Other Hardware, then Printers and
b. Right-click the Canon i350 or i250
icon, then click
NOTE: For Windows 98/Me, click
i350 or i250 icon,
then click Properties.
c. Click the Maintenance tab, then click
the Print Head Alignment icon.
d. When asked to start print head
alignment, click OK.
Macintosh OS X:
Macintosh HD icon, then
Utilities folder, then the Print Center icon.
Select i350 or i250.
Under the Printers menu, select
Configure Printer. Select i350 or i250,
and click Select.
b. Click the down-arrow to select Test Print.
c. Click the Print Head Alignment icon.
Follow the on-screen instructions.
Click OK (Windows) or Send (Macintosh)
©2003 Canon U.S.A. Inc.
Canon is a registered trademark of Canon Inc.
All other products and brand names are registered
trademarks or trademarks of their respective owners.
Specifications subject to change without notice.
Printed in Thailand