Page 1
Gateshead, Tyne & Wear Installation, operating, and instruction manual NE11 0PG, UK T: 0845 402 3434 Please leave this manual with the end user F: 0191 491 7568 sales@purmogroup.com www.myson.co.uk Class I - 230V - 50 Hz Register your warranty online at www.myson.co.uk...
Contents 1.0 Warnings & Safety Information Safety information Children of less than Warnings & Safety Information 3 years should be kept General Information This appliance can be away from the unit unless Warranty used by children aged continuously supervised. Installation from 8 years and above Maintenance, Repair &...
Page 3
The product is covered by a 2 year warranty shall therefore only be carried out by the commissioned by qualified professionals only. from date of purchase. manufacturer or his approved agent. Please Make sure to adhere to valid safety regulations. contact MYSON in case of leakage.
Page 4
FINESSE 4.0 Installation 4.0 Installation (cont...) POSITIONING FINESSE Double Panel (refer to figure 2) The radiator must be positioned horizontally, Height (mm) the right way up on the wall in order for it to function correctly. Never switch the radiator Min.
FINESSE FINESSE 6.0 Waste Disposal According to The WEEE Directive (2012/19/EU) 7.0 Operation (cont...) Waste disposal according to effects on the environment and health to which 7.1 STAND-ALONE RADIATOR 7.2 RADIATOR CONNECTED the WEEE Directive (2012/19/ the product can contribute if it is disposed of as TO A TOUCH4 CENTRAL EU).
FINESSE FINESSE 7.0 Operation 8.0 Parameter Menu (cont...) 8.1 HOW TO ENTER THE LED A and C ~ 90°C MAX ~ 75°C MAX ~ 60°C MAX PARAMETER MENU LED A BLINKING Note: When considering the permanent use ORANGE De-activate The thermostat has a parameter menu. In order...
FINESSE FINESSE 8.0 Parameter Menu 8.0 Parameter Menu (cont...) (cont...) 8.3 FUNCTIONS AVAILABLE IN 8.3.3 SETTING THE TIME 8.3.1 CHECK AND SET TIME THE PARAMETER MENU To enter into this function, follow the below steps:- When in the top level of the parameter menu,...
Page 8
FINESSE FINESSE 8.0 Parameter Menu 8.0 Parameter Menu (cont...) (cont...) LED A will be off. LED C will start flashing orange/green, To return to previous mode, turn Dial B or D and indicating that dial D must now be set to Day 2.
FINESSE FINESSE 8.0 Parameter Menu 9.0 Radiator Connected to the TOUCH4 Programmer (cont...) or -3,5 and then Rotate dial D to Symbol Programme Number Wire Colours PILOT WIRE FROM slide switch E to then back to to confirm. BR = Brown...
Page 10
FINESSE FINESSE 9.0 Radiator Connected to the TOUCH4 Programmer 10.0 Technical Characteristics (cont...) ENVIRONMENT: - Operating temperature -30°C to +50°C - Transportation and storage temperature -30°C to +70°C Touch Wire Colours RANGES FOR TEMPERATURE SETTINGS: BR = Brown - Comfort mode +5°C to +30°C...
Page 12
Room temperature control, with open window detection With distance control option With adaptive start control With working time limitation With black bulb sensor Contact details MYSON Eastern Avenue, Team Valley, Gateshead, Tyne & Wear NE11 0PG, UK 0845 402 3434, 0191 491 7568, sales@myson.co.uk, www.myson.co.uk...
Need help?
Do you have a question about the Finesse and is the answer not in the manual?
Questions and answers