Specifications - Brother BAS-311F-0 Instruction Manual

2. SPECIFICATIONS

2. SPECIFICATIONS
BAS-311F-0 [*1] [*2]
BAS-311F-L [*3] A
BAS-326F-0 [*4] A
Stitch formation
Sewing machine
Maximum pattern size
Maximum stitch number
Stitch length
Maximum sewing speed
Feed mechanism
Rotary hook
Needle
Data storage method
Test function
Safety devices
Work clamp height
2-step work clamp
Work clamp lift stroke
Intermittent stroke
Weights
Power supply
Motor
Air pressure
Power table
Machine dimensions
2
*1
1. For Heavy-weight Materials
2. For Medium-weight Materials
3. For Extra heavy-weight Materials
4. For special use
*3
1. For Heavy-weight materials, Work Clamp Lifter (Pneumatic Type)
4. For special use, Work clamp Lifter (Pneumatic Type)
*4
1. For Heavy-weight Materials, Work Clamp Lifter (Pneumatic Type)
2. For Medium-weight Materials, Work Clamp Lifter (Pneumatic Type)
4. For special use, Work Clamp Lifter (Pneumatic Type)
Lock stitch, pattern tacking sewing machine (with large shuttle hook)
BAS-311F-0: 130 X 60 mm, BAS-311F-L: 220 X 60 mm, BAS-326F-0: 220 X 100 mm
2,500 rpm (When stitch length is 3 mm or less)
Shuttle hook (Standard rotary hook is sold separately)
Operation test function provided for use with low speed drive
Automatic stop function for activation in the event of misoperation realized with intermediate
BAS-311F-0:For solenoid - Max. 25 mm, for pneumatic - Max. 30 mm
BAS-311F-0:For solenoid - unit work clamp, for pneumatic - separate work clamp
BAS-311F-L, BAS-326F-0:Separate work clamp
Machine head BAS-311F-0: 65kg, BAS-311F-L, BAS-326F-0: 70kg
Control box: 10 - 20 kg (depending on destination)
Single-phase 110V, 220V, 240V, 3-phase 220V, 380V, 400V, 600VA
1,350 H mm (Standing) .....Excluding spool stand
BAS-311F-0, 311F-L, 326F-0
*2
S. Work Clamp Lifter (Solenoid Type)
A. Work Clamp Lifter (Pneumatic Type)
Single needle lock stitch
20,000 (one pattern)
0.05 - 12.7 mm
Intermittent feed, pulse motor drive
DP X 5, DP X 17, MR
3.5 floppy disk 2HD/1.44MB, 2DD
stop function and safety circuits
BAS-311F-L, BAS-326F-0:Max. 30 mm
18 mm
0 or 3 (Factory default) - 8 mm
Three-phase 400 W induction motor
0.50 MPa 1.8 l/ min
T-shaped for use sitting or standing
1,200W X 590 D X 1,120 H mm (Sitting)