Brother BAS-311F-0 Instruction Manual page 66

Memory switches (00 - 0F)
Switch No.
When moving to the home position, the feed plate moves in the order X
memo-00
moves in the order Y
When moving to the home position, the feed plate moves in the order Y
memo-01
moves in the order X
The forward position becomes the home position, and movement is in the order Y
memo-02 X
Use when there is an obstacle at the center of the work clamp.
memo-03 Eject device operates. (Eject device is available by special order.)
memo-04 Needle stops in up position during emergency stop. (Needle normally stops in down position.)
memo-05 When sewing is finished, the feed plate moves via the machine home position to the start position.
memo-06 After the final stitch, the work clamp rises and then the feed plate returns to the start position.
memo-07 Intermittent work clamp is not used (does not rise).
When using an inner clamping device, the clamping presser is ON for 1/4 and OFF for 3/4 of the
memo-08
pattern. (Inner clamping device is available as an option.)
memo-09 Changes the wiper to air drive. (Air wiper is availabe as an option.)
memo-0A Jog feeding becomes faster during programming.
memo-0b ON when a two-stage tensioner is used. (Two-stage tensioner is available as an option.)
memo-0c Single-pedal operation by means of two-stage work clamp switches. DIP switch A-2 is ON
Clearing the emergency stop switch action is carried out using the STEP BACK switch.
Note: The factory default setting is ON, and it changes to ON when all memory settings are
memo-0d
memo-0E Test feeding is carried out at the same speed as normal sewing. (For checking feed operation)
After sewing is finished, the work clamp automatically opens and closes once. (practice operation)
memo-0F
If memo-0E is ON, the work clamp opens and closes twice.
11. CHANGING SPECIAL FUNCTION AND USING THE MEMORY SWITCHES
X.
Y.
Y.
cleared.
BAS-311F-0, 311F-L, 326F-0
When ON
Y and the start position
X and the start position
X and
59