5.5.3 IP Routing
The IP Routing menu
The Static Route page
The Dynamic Routing
page
E-DOC-CTC-20041126-0014 v3.0
The IP Routing menu consists of the following pages:
The Static Route page
The Dynamic Routing page
This page allows you to add/delete static routes for the SpeedTouch™ router:
The Routing Information Protocol (RIP) is used to exchange routing information
between routers. This helps the routers to determine optimal routes.
The Dynamic Routing page allows you to enable/disable RIP on the SpeedTouch™
interfaces:
Following fields are available:
Version:
It incorporates the RIP information when receiving and broadcasting the RIP
packets.
Operation:
Active to transmit
Passive to
only
receive routing information from other routers.
Enabled:
You are able to enable/disable RIP for each interface.
and
receive routing information from other routers.
Chapter 5
SpeedTouch™ Web Interface
59