Miele CM 6160 Operating Instructions Manual page 77

Problem
The milk sputters when
it is dispensed. Hissing
noises can be heard
when milk is being
heated up or frothed.
Although the milk
should be frothed, only
hot milk comes out of
the main dispenser.
Frequently Asked Questions
Possible cause and solution
The milk pipework was not correctly inserted.
 Pay attention to the seam on the double hose
when you connect the milk pipework into the main
dispenser.
 If you have disconnected the milk pipework from
the rinse valve: the double hose has different
diameters. Make sure all parts are assembled
correctly.
The milk temperature is too high. Good milk froth can
only be achieved when cold milk (below 50°F/10°C)
is used.
 Check the temperature of the milk.
The main dispenser is not correctly mounted and is
taking in air. Or the spouts are blocked.
 Check whether the main dispenser is correctly
assembled. Make sure that all parts are tightly
connected to one another.
 Clean the main dispenser. Rub the spouts under
running water to remove any dirt.
The milk pipework, connecting pieces, the stainless
steel tube of the milk flask, or the milk siphon are
blocked.
 Clean all parts carefully with the cleaning brush.
The steam jet on the main dispenser has a blockage.
 Clean the steam jet with the cleaning brush (see
illustration).
77