Canon PIXMA MP140 Series Quick Start Manual page 15

2
Prepare to load paper.
(1) Open the Paper Support.
(2) Pull out the Paper Support Extension.
(3) Open the Paper Output Tray.
(4) Adjust the position of the Paper Thickness
Lever.
Set it to the right when printing on envelopes or
T-shirt transfers, and left when printing on any
other type of paper. See "Paper Handling" on
page 8.
Note
If the corners or edges of the paper are smudged, try
to print with the Paper Thickness Lever set to the right.
It may improve print quality.
Reset the Paper Thickness Lever to the left when you
finish printing.
For details on the Paper Thickness Lever, refer to
"Inside View" in "Main Components" of the User's
Guide on-screen manual.
3
Load the paper.
(1) Load the paper in the Auto Sheet Feeder with
the print side facing UP.
(2) Align the paper stack against the right side of
the Auto Sheet Feeder.
(3) Pinch the Paper Guide and slide it against the
left side of the paper stack.
(4)
(3)
(3)
* Do not load higher than the Load Limit
Mark (A).
Before Using the Machine
(1)
(2)
(1) (A)
(2)
11