Loading Envelopes - Canon PIXMA MP140 Series Quick Start Manual

Loading Envelopes

Use either European DL or US Comm. Env. #10-sized envelope.
1
Load the envelopes against the right side of
the Auto Sheet Feeder.
Load with the address side facing UP and the rear
flaps DOWN on the left.
Up to 10 envelopes can be loaded at once.
2
Pinch the Paper Guide and slide it against the
left side of the envelope.
3
Set the Paper Thickness Lever to the right.
Note
Reset the Paper Thickness Lever to the left when you
finish printing. For details on the Paper Thickness
Lever, refer to "Inside View" in "Main Components" of
the User's Guide on-screen manual.
4
Specify the settings in the printer driver.
(1) Select Envelope in Media Type.
(2) Select the size for envelopes.
In Windows
In Macintosh, select DL Envelope or #10 Envelope in Paper Size.
(3) Select Landscape in Orientation.
Important
Be sure to set the printer driver setting properly. If you do not, the address will be printed in the
wrong direction.
Note
For details on printer driver settings, see "Printing with Windows" on page 14 or "Printing with
Macintosh" on page 15.
12 Before Using the Machine
®
, select DL Env. or Comm. Env. #10 in Page Size.
(2)
(B)
(3)
(A) Printing orientation
(B) Make sure the flaps are folded.
(C)
(1)
(A)