Using The Appliance - Rowenta 1002 Instruction Manual

Body sculpt massager
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 5

USING THE APPLIANCE

Apply your anti-cellulite skincare product
Switch on the device by pressing the "power" button. Start with speed 1
and increase it according to your sensitivity to the massage.
Hold the massager firmly and move it with circular movements (refer
to the pictograms below). We recommend a use 5 min per area (thighs,
buttocks, belly and arms) daily for 1 month, then one maintenance ses-
sion per week the following months.
Your device is waterproof and can be used underwater.
We recommend recharging your device after each use
IN CASE OF ANY ISSUE
Your device shuts down during use:
- Check that the battery charge level is
sufficient.
- Check that you do not apply too much
pressure to the skin in use. For safety reasons,
the device is fitted to stop the device if the
pressure is too high for too long. The product
should restart automatically when the pressure
is released.
For any other reason, return your device to a
service center.
14
ENVIRONMENT PROTECTION FIRST
Your appliance contains valuable materials which can be
recovered or recycled. Leave it at a local civic waste collection
point.
Recycling the batteries:
Before removing the LI-ION batteries, discharge them
completely. Open the battery compartment using a tool, cut all the
connections and then recycle the batteries in a safe manner.
Those instructions are also available on our website
www.rowenta.com
Ref. : 1002
Groupe SEB – Rue du Champ de courses
38780 Pt Evêque – France
421 266 271 R.C.S. Lyon
INPUT : 100-240V 50/60Hz
OUTPUT : 10.0V 1.5A 15W
A.A.E. : 84,5%
E.L.L. (10%) : 81.5%
No load : 0,06W
15

Advertisement

Table of Contents
loading

Table of Contents