Technoline WS6462 Manual page 36

Setting the daily alarms:

Press the " " button once and the alarm activation mode is displayed. In this mode, press the "
activate the alarm function, "ON" and the alarm icon "
the alarm "OFF" is displayed and the alarm icon "

Press and hold down "
the "▲" and "▼" buttons to set the required hour.

Press " " button to confirm your setting, the minute display of the alarm time starts to flash. Use the "▲" and "▼"
buttons to set the required minute.

Press " " button to confirm your setting, the snooze time of the alarm starts to flash. Use the "▲" and "▼" buttons
to set the minute of snooze you need.

Press " " button to confirm your setting and to end the setting procedure.
Notes:

After 20 seconds without pressing any button the clock switches automatically from setting mode to Normal clock
mode.

The alarm will sound for 2 minutes if you do not deactivate it by pressing any button. In this case the alarm will be
repeated automatically after 24 hours.
" button for 2 seconds until alarm time hour display of the alarm time starts to flash. Use
" are displayed. Press the "
" is no longer displayed.
36
" button to
" button again to deactivate