Table of Contents
Advertisement
INSTALLATION OF THE APPLIANCE FEET
In order to install the appliance feet;
1. Foot attachment lath is installed on the
in (figure 1).Nuts are centered on these lathes in order to screw feet. Complete the feet
installation process by screwing the feet to the nuts (figure 2).
2. You can balance your appliance by turning the screwed feet according to the surface type
you are using.
3. If your appliance has telescopic feet as in (figure 3) you can adjust your appliance height
from these feet as turned clockwise or anticlockwise.
Figure 1
CHAIN LASHING ILLUSTRATION
appliance
from the bottom of the
Figure 2
Before using the appliance, in order to ensure safe use,
be sure to fix the appliance to the wall using the chain and
hooked screw supplied. Ensure that the hook is screwed
into the wall securely.
13
appliance
as shown
Figure 3
Advertisement
Table of Contents
