Estimated Installation Time; Notes On The Wireless Lan - Canon imageCLASS MF200 Series Service Manual

C. Estimated Installation Time
The estimated length of time needed to unpack and install the main unit is
approximately 5 minutes. This is based on one (1) experienced technician or
end-user.
The time needed to install the printer driver on the imageCLASS devices is
shown below. Add this amount of time to the estimated installation time of the
main unit.
imageCLASS MF229dw and MF227dw via:
- USB Connection:
- Wired Connection:
- Wireless Connection: Approximately 2.5 minutes
imageCLASS MF216n and MF212w via:
- USB Connection:
- Wired Connection:
- Wireless Connection: Approximately 2.0 minutes
D. Notes on the Wireless LAN
 The imageCLASS MF229dw, MF227dw, and MF212w must be kept within
(approximately 164' (50 m)) from the wireless Local Area Network router
or access point.
 Obstacles such as walls and floors can reduce the effective range
resulting in deterioration of communications. Avoid obstacles between the
machine and the wireless Local Area Network router or access point.
 Microwaves and refrigerators may cause interference if the machine or
wireless Local Area Network router or access point is installed nearby.
Keep the machine, wireless Local Area Network router or access point
away from microwaves and refrigerators.
 When multiple networks are used to avoid interference between the
channels, set each network to a channel that is as far apart from other
network channels, such as Ch.1, Ch.6, and Ch.11. Refer to the instruction
manual of the wireless Local Area Network router or access point, or
contact the manufacturer for information on checking and setting methods
for channels.
imageCLASS MF200 Series Service Guide for Authorized Servicers
imageCLASS MF200 Series Service Guide for Authorized Servicers
Approximately 1.6 minutes
Approximately 2.1 minutes
Approximately 1.0 minutes
Approximately 1.8 minutes
August 2014
Page 11