Table of Contents
Advertisement
9.
Installation Review
This chapter describes the necessary number of technicians required to install the
machine properly, the time required to install the main unit and optional equipment,
and customer installation responsibilities.
9.1 Installation Time
The time required to install the Canon varioPRINT 110 depends on the options and
accessories to be installed, and the number of technicians performing the
installation. Customers should discuss the time requirements with their servicing
dealer and schedule the installation accordingly.
The table below indicates the estimated length of time needed to unpack and
install the machine and optional accessories, and calculated from the average
amount of manpower hours. The estimated installation times are based on a
minimum of two (2) experienced technicians.
Main Unit
Operator Panel
Operator Attention Light-C1
Duplex Color Image Reader-D1
Color Image Reader-J1 (Printer Only Model)
ePIM-C1
Bulk Tray Small Format
Document Insertion Unit-F1
Duo Paper Tray-C1
High Capacity Stacker-E1
Second High Capacity Stacker-E1
High Capacity Stacker-G1
Second High Capacity Stacker-G1
Paper Folding Unit-F1
Finisher-AK1/Saddle Finisher-AK2
Professional Puncher-B1 with Professional Puncher Integration Unit-A1
Booklet Trimmer-D1
Two-Knife Booklet Trimmer-A1
SDD Square Fold Booklet-Maker & Two-Knife Trimmer
SDD Square Fold Booklet-Maker
Version 13
Description
varioPRINT 110 Customer Expectations Document
varioPRINT 110 Customer Expectations Document
Estimated Time
3 hours
15 minutes
5 minutes
13 minutes
15 minutes
45 minutes
45 minutes
10 minutes
90 minutes
12 minutes
15 minutes
1 hour
1 hour
11 minutes
12 minutes
18 minutes
28 minutes
11 minutes
2 hours
2 hours
Page 55
Advertisement
Table of Contents
