Test The I-Fan; Using The I-Fan; First Use; Control Options - Fancom I-FAN COMPLETE Manual

2. Drill the three holes with a ø5mm bit.
3. Place the protective screen on the I-fan and fix the protective screen with a M5 x 30 bolt.
2.4

Test the I-fan

1. Check whether the I-fan has been connected correctly.
2. Check whether the I-fan works optimally.
Do not touch any of the I-fan moving parts.
3.

Using the I-fan

3.1

First use

Do not touch any of the I-fan moving parts.
Fancom advises to leave the I-fan on for about 6 hours after installation, to let it run in.
3.2

Control options

Analogue control (0-10V;10-0V)
Gndfi
11
g