Installing The Maintenance Release Software; Multipass C3000 Users - Canon MultiPASS C3000 Software Manual

Installing the Maintenance Release Software

Before you begin, close any programs that are open.
The following procedures describe how to install the Maintenance
N
Release software from a CD. If you are installing from diskettes, please
insert the appropriate diskette into your diskette drive and type a:
instead of d: in the following instructions (where a: identifies your
diskette drive).

MultiPASS C3000 Users

1. Insert the Maintenance Release CD into your CD drive.
2. From the Windows taskbar, click Start, Settings, and Printers. Now,
double-click the Add Printer icon.
3. When you see the Add Printer Wizard screen, click Next. Select
Local Printer and click Next. Now, click the Have Disk button.
4. In the Install From Disk dialog box, type d:\mpc3000\winbj\
disk1 (where d: is your CD driver; most CD drives are d: or e:)
and click OK.
5. When you see the Canon MultiPASS C3000 Printer highlighted in
the Add Printer Wizard screen, click Next.
6. Make sure the MultiPASS is connected to the LPT port selected here
(such as LPT1) and click Next.
7. On the next Add Printer Wizard screen, you can change the printer
name or leave it as Canon MultiPASS C3000 Printer. You can also
specify whether or not you want the MultiPASS C3000 to be your
default printer. Now click Finish.
8. When you see the Insert Disk dialog box, click OK.
4 MultiPASS Desktop Manager Update
MAINTENANCE RELEASE/V000/08-98