Multipass C5000 Users; Multipass L6000 Users - Canon MultiPASS C3000 Software Manual

9. In the Copying Files dialog box, type d:\mpc3000\winbj\
disk2 (where d: is your CD driver; most CD drives are d: or e:)
and click OK.
10. When you see the Setup screen that asks you to insert Disk 1 of the
MultiPASS Desktop Manager, type d:\mpc3000\mpassdtm\
disk1\setup.exe (where d: is your CD driver; most CD drives
are d: or e:) and click OK.
11. Follow the on-screen instructions to complete installation of the
MultiPASS Desktop Manager.

MultiPASS C5000 Users

1. Start Windows. If you see a "New Hardware Found", "Update Device
Driver Wizard", or "New Hardware Wizard" screen, click Cancel.
(Click whatever you need to until you return to the Windows
Desktop.)
2. Insert the Maintenance Release installation CD into your CD drive.
3. From the Windows taskbar, click Start and then Run.
4. In the Run dialog box, type d:\mpc5000\setup.exe (where
d: is your CD driver, most CD drives are d: or e:) and click OK.
5. Follow the on-screen instructions.

MultiPASS L6000 Users

1. Start Windows. If you see a "New Hardware Found", "Update Device
Driver Wizard", or "New Hardware Wizard" screen, click Cancel.
(Click whatever you need to until you return to the Windows
Desktop.)
2. Insert the Maintenance Release installation CD into your CD drive.
3. From the Windows taskbar, click Start and then Run.
4. In the Run dialog box, type d:\mpl6000\setup.exe (where
d: is your CD driver; most CD drives are d: or e:) and click OK.
5. Follow the on-screen instructions.
MAINTENANCE RELEASE/V000/08-98
MultiPASS Desktop Manager Update 5