Christie CP4230 Setup Manual page 2

or brief exposure (before a person can avert his or her eyes away from the light source). The
light may cause skin burns to occur.
• B—Hazard distance. Operators must control access to the beam within the hazard distance or
install the product preventing potential exposure of the spectators' eyes from being in the
hazard distance.
• C—No access zone. Horizontal clearance of the no access zone must be a minimum of 1.0
meters.
• D—Vertical distance to hazard zone. The hazard zone must be no lower than 2.5 meters (US
installations) or 2.0 meters (global installations) above any surface upon which any persons
are permitted to stand.
• E—Represents the top view of the projector.
• F—Represents the side view of the projector.
Table 1: CP4230 Lenses
Lens Type Projection Lens
HB 1.25-1.45:1
1.45-1.8:1
1.8-2.4:1
2.20-3.0:1
3.0-4.3:1
4.3-6.0:1
5.5-8.5:1
1.45-2.05:1
1.6-2.4:1
1.8-3.0:1
2.15-3.6:1
1.25-1.83:1
HC 1.25-1.83:1
1.45-2.05:1
1.6-2.4:1
1.8-3.0:1
2.15-3.6:1
1.8-2.4:1
2.2-3.0:1
1.45-1.8:1
1.25-1.45:1
Christie CP2230 Addendum
020-103541-01 Rev. 1 (05-2021)
Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.
CP4230 Setup Guide Light Hazard Addendum
Part Number
108-274101-XX
108-275101-XX
108-276101-XX
108-277101-XX
108-278101-XX
108-279101-XX
108-280101-XX
108-335102-XX
108-336103-XX
108-337104-XX
108-338105-XX
108-342100-XX
108-400105-XX
108-401106-XX
108-402107-XX
108-403108-XX
108-404109-XX
38-809052-XX
38-809053-XX
38-809061-XX
38-809079-XX
2