Initial Use - Beurer maremed MK 500 Instructions For Use Manual

Display

6. Initial use

Inserting the water filter and pre-filter
1. Open the cardboard packaging.
2. Remove the cover from the maremed
3. Remove the film packaging from the water filter and take out the two pre-filters.
1 Timer display
Displays the number of hours until the device is
switched off. 0 denotes continuous operation.
1
2 UVC lamp faulty/replace the UVC lamp
The old UVC lamp must be replaced as soon as this
2
symbol lights up.
3
3 Filter change indicator
4
The filters (pre-filter and water filter) must be re-
placed as soon as this symbol lights up. We recom-
5
mend replacing the filters every 3 months.
4 Water level gauge
If the water level is at "MIN", the water tank must be
6
filled with fresh water and maremed
salt.
5 Fan speed
7
The maremed
6 FAN button
7 TIMER button
8
For setting the number of hours after which the de-
vice should automatically switch off (1 to 24 hours).
8 SLEEP button
9
If you press the Sleep button, the touch display
switches off.
9 ON/OFF button
For switching the device on and off.
in an upward direction.
®
29
comes with a total of 3 fan speeds.
®
® special sea